Read the three measurements before anything else
The Anal Hook from the Master Series is a stainless steel piece with a 1.5-inch diameter ball at one end, an open ring at the other, and a 10-inch total length that includes a 3.5-inch insertable arm. Those three numbers drive every decision that follows: how the ball is inserted, how much of the hook sits outside the body, and how much room the ring leaves for rope or other bondage equipment.
The insertable arm is the part that goes in, and the ball is what the listing describes as providing stimulation. The listing also states that the ball lets you pull the hook upward without impaling your partner. Treat that as the design intent, not a substitute for your own judgment about pace, tension, and comfort.
Anal Hook specifications that shape setup
- The Anal Hook: Ball measures 1.5 inches in diameter, anal hook measures 10 inches in total length with a 3.5 inch insertable arm. The 3.5-inch insertable arm is the working length; the 10-inch total includes the ball and the shaft that stays outside, so plan the external clearance before you attach anything.

The Anal Hook - The Anal Hook: Material: Stainless steel. Color: Silver. The listing identifies the material as stainless steel, which is the basis for any cleaning or storage decision you make.
- The Anal Hook: Hooked features a stainless steel end ball that is inserted into the anus and an open ring at the other end which can be hook up to ropes and other bondage equipment, ensuring a strong hold on its wearer. The open ring is the attachment point; the listing describes it as compatible with ropes and other bondage equipment, so that is where your bondage setup connects.
A setup sequence built around the ring and the ball
The listing does not include a step-by-step procedure, so this sequence is organized around the features it does describe. Keep each step conservative and stop if anything feels wrong.
- Check the ball and ring before play: Inspect the 1.5-inch ball and the open ring for anything that looks off. The listing does not specify a pre-use inspection routine, so use your own visual check.
- Decide on your attachment before insertion: The open ring is designed to hook up to ropes and other bondage equipment. Sort out what you will connect and how much slack you want before the hook is in place, because adjusting hardware afterward is harder.
- Insert the ball end with the ring positioned for your setup: The ball is the part that goes in. The listing does not give insertion instructions, so go at your own pace and use your own judgment about comfort.
- Connect the ring and test tension gently: The listing says the ring ensures a strong hold on its wearer. Test any pull gradually rather than assuming a fixed tension is right.
- Keep the 3.5-inch insertable arm in mind: The insertable arm is 3.5 inches, so the rest of the 10-inch total length stays outside. Plan your positioning around that external length.
What the open ring means for bondage attachment
The Anal Hook is built for combining bondage and anal play. The open ring at the non-inserted end is the connection point for ropes and other bondage equipment, and the listing describes it as providing a strong hold on the wearer. That makes the ring the part of the toy that ties into your bondage setup rather than a decorative detail.
Because the listing does not specify rope types, knots, or tension limits, treat attachment as something to work out with your partner and your own equipment. The design intent is clear, but the exact hardware and tension are not confirmed by the supplied information.
The Cannonball option and what it changes
The supplied preparation note says you can unscrew the original ball and attach the larger, heavier Cannonball for a new range of stimulation and exploration. The listing also notes that Hooked can be used with the Master Series Cannonball Intruders Orb for even more sensation.
That means the ball is a swappable component, not a fixed part. If you plan to switch, do it before play rather than mid-session, and keep track of the original ball so the hook stays complete. The listing does not give a torque or tightening specification, so use ordinary care when screwing a ball back on.
Cleaning and storage: what the listing does not confirm
The supplied record identifies the material as stainless steel but does not include cleaning instructions, lubricant compatibility, or storage guidance. That is a gap in the information provided, not a statement that the toy cannot be cleaned. For a stainless steel toy, ask the retailer or manufacturer for the recommended cleaning method before first use, and follow that guidance rather than improvising.
The same applies to storage. The listing gives no storage instructions, so keep the hook somewhere it will not be knocked around or tangled with other equipment, and check the ball and ring before the next session.
Beginner advice that follows from the specs
If you are new to anal hooks, the measurements are the place to start. A 1.5-inch ball and a 3.5-inch insertable arm are specific dimensions, and the 10-inch total length means a noticeable amount of the hook stays outside the body. Plan your position and your attachment around that external length before you begin.
The listing describes the hook as combining bondage and anal play, so it is reasonable to treat it as a piece for partnered or bondage-focused sessions rather than a quick solo toy. The supplied information does not include a beginner protocol, warm-up steps, or a recommended session length, so build your own conservative approach and stop if anything is uncomfortable.

