How to Clean and Maintain a Silicone Ball Gag

Quick Answer

Clean your silicone ball gag after every use with warm water and mild soap, then sanitize it with a boiling-water soak or a 10% bleach solution. Store it in a dust-free bag away from direct sunlight and other toys to prevent material degradation.

Step-by-Step Cleaning & Maintenance Guide

1. Step 1: Rinse Immediately After Use: Remove the gag and rinse it under warm (not hot) running water for 15-20 seconds. This flushes away saliva, lube, and debris before they dry onto the silicone. If the gag has a strap, hold the ball portion only—avoid getting the buckle wet if it's not stainless steel. Common mistake: letting the gag sit for hours before cleaning. Dried saliva is harder to remove and can trap bacteria.
2. Step 2: Wash with Mild Soap and Warm Water: Apply a small drop of fragrance-free, mild liquid soap (like unscented castile soap) to your fingers or a soft cloth. Gently scrub the entire ball surface, including the inner mouthguard area and the strap attachment points. Use a soft-bristled toothbrush for textured or ridged areas. Rinse thoroughly until no soap residue remains. Checkpoint: run your finger over the surface after rinsing—if it feels slippery, there's still soap left. Rinse again.
3. Step 3: Sanitize (Optional but Recommended): For a deeper clean, boil the silicone ball in a pot of water for 3-5 minutes, or soak it in a 10% bleach solution (1 part bleach to 9 parts water) for 10 minutes. Rinse thoroughly with warm water afterward. Do not boil or bleach the strap or buckle—remove them first if possible, or sanitize the ball separately. Warning: boiling can damage silicone if it touches the pot bottom. Place the ball in a mesh bag or suspend it with a utensil to avoid direct contact with the hot metal.
4. Step 4: Dry Completely Before Storing: Pat the silicone ball dry with a lint-free cloth, then let it air-dry on a clean towel for at least 30 minutes. Make sure the mouthguard interior and any crevices are fully dry. For the strap, blot it dry and hang it in a well-ventilated area. Common mistake: storing a damp gag in a sealed bag. Moisture promotes mold growth on the strap material and can cause silicone to develop a musty odor.
5. Step 5: Store in a Cool, Dry Place: Place the clean, dry gag in a breathable storage bag or a dedicated toy pouch. Keep it away from direct sunlight, heat sources, and other silicone toys (silicone-on-silicone contact can cause material degradation over time). If the gag has a buckle, wrap the strap loosely to prevent the buckle from pressing into the silicone ball. Checkpoint: inspect the gag before each use for cracks, sticky spots, or loose hardware. Replace it if you see any damage.

Product Spotlight

• Gag Order Extreme Silicone Ball Gag: The Gag Order Extreme Silicone Ball Gag is shaped like a mouthguard on the inside and a ball on the outside, giving it a classic ball gag look with more to bite down on. The mouthguard-like interior means more surface area contacts saliva and teeth, so thorough cleaning of the inner ridges is essential to prevent odor or residue buildup.